CAMERAS>>Box Type>>CAMT290WD
Part No : CAMT290WD 1/3" Sony CCD Wide-dynamic DSP Camera 520/530 TV Line Day/Night 0.018Lux/0.0045lux 12DC/24AC
Our Price
:
 $
List Price
:
 $
In Stock
:
Quantity   : 
 
Have you seen a lower price? Click Here
 
CAMT290WD is a 1/3" Sony CCD Wide-Dynamic DSP Day/Night Camera with 520/530 TVL. This camera has a digital zoom 2.6X, gamma correction, a minimum illumination day mode of 0.018 lux (F1.2, AGC on, 10 IRE), night mode of 0.0045 lux (F1.2, AGC on, 10 IRE), privacy zone on / off (up to 8 zones), and a 10W (max.) power consumption.
 
Features
  • Iris control: Video / DC driver
  • Gain control: Auto (normal / turbo)
  • White balance: ATW1 / ATW2 / manual
  • Auto slow shutter from 0.04 sec. to up to 5.3 sec
  • Electric shutter: Auto 1/60(1/50) to 1/100,000sec. / manual
  • S/N ratio: 50dB (AGC off)
  • Minimum illumination Night mode: 0.0045 lux(F1.2, AGC on, 10 IRE)
  • Digital zoom: 2.6X
  • Privacy zone: On / Off, up to 8 zones
  • Minimum illumination Day mode: 0.018 lux(F1.2, AGC on, 10 IRE)
    		•
     
    Specifications
    Signal system: NTSC / PAL Imaging area: 4.9mm x 3.7mm Image pickup device: 1/3"-type vertical double density interline CCD Effective pixels (HxV): 768 x 494 / 752 x 582 Scanning system - 2:1 Interlace V: 59.94Hz, 2:1 Interlace V: 50Hz, H: 15.734KHz H: 15.625KHz S ync system: Internal / linelock Horizontal resolution: 520/530 TV lines (day/night mode) Dynamic range: 128X(43dB) Lens mount CS with backfocus Digital zoom: 2.6X Gamma correction: 0.45 / 1.0 selectable Minimum illumination: Day mode: 0.018 lux(F1.2, AGC on, 10 IRE) Minimum illumination: Night mode: 0.0045 lux(F1.2, AGC on, 10 IRE) S/N ratio: 50dB (AGC off) Iris control: Video / DC driver Gain control: Auto (normal / turbo) White balance: ATW1 / ATW2 / manual Electric shutter: Auto 1/60(1/50) to 1/100,000sec. / manual Auto slow shutter from 0.04 sec. to up to 5.3 sec. BLC BLC1 / BLC2 / BLC3/ BLC4 / User define / off Privacy zone: On / off, up to 8 zones Day/Night mode: Auto / manual OSD: Yes Remote control: Pelco-P, Pelco-D via RS485(RJ45) interface Video output: 1Vpp composite output, 75 ohm Power requirement: DC12V / AC24V AC90~260V DC12V / AC24V AC90~260V Power consumption: 10W (max.) Operating temperature: -10 oC ~ 50 oC Operating humidity: 30% ~ 90% RH Storage temperature: -20 oC ~ 60 oC Dimensions(WxHxD): 66mm x 55mm x 130mm (2.6" x 2.16" x 5.11")